Nutso font doesn’t work correctly
Nutso font doesn’t work correctly
In Adobe Products the Nutso font doesn’t work correctly. Only Affinity Designer does it right.
Is there a solution that will work in all Programs?
When I look at this font with the OpenType Designer I don't understand what I see there.
Thank you in advance
Dean
P.S. I'm a beginner in Font Design
Is there a solution that will work in all Programs?
When I look at this font with the OpenType Designer I don't understand what I see there.
Thank you in advance
Dean
P.S. I'm a beginner in Font Design
Last edited by Bhikkhu Pesala on Sun Nov 25, 2018 10:17 am, edited 2 times in total.
Reason: Split old topic to new thread
Reason: Split old topic to new thread
-
- Top Typographer
- Posts: 9890
- Joined: Tue Oct 29, 2002 5:28 am
- Location: Seven Kings, London UK
- Contact:
Re: Nutso font doesn’t work correctly
The stacking fractions feature is much simpler if one uses precomposed fractions.
I could not open a copy of the Nutso font to see how it's done, but I assume that it is still experimental.
This is how my alternative fractions feature is designed in Pali:
The fractions feature is more complex, but will work with any denominator or numerator as the divisor does not need to change.
Bottom Line: Among those few users who need stacking fractions with unlimited numerators and denominators how many would expect to use OpenType features for this, and how many would just use an equation editor? Is it really worth the effort needed to implement this to work on most applications.
I could not open a copy of the Nutso font to see how it's done, but I assume that it is still experimental.
This is how my alternative fractions feature is designed in Pali:
The fractions feature is more complex, but will work with any denominator or numerator as the divisor does not need to change.
Bottom Line: Among those few users who need stacking fractions with unlimited numerators and denominators how many would expect to use OpenType features for this, and how many would just use an equation editor? Is it really worth the effort needed to implement this to work on most applications.
Re: Nutso font doesn’t work correctly
hi,
yes this is the easy way however not really flexible.
in the pic, you can see how you can download. is a little bit tricky
download zip
inside the zip, you can see different versions of
Nutso is only a font with Numbers etc.
stacked fraction must work in AI, ID and other software that works with open type features.
thank you in advance.
@Bhikkhu Pesala my question is. how I can transfer this features to other fonts to have the stacked fraction features?
Nutso: https://github.com/TiroTypeworks/Nutso
yes this is the easy way however not really flexible.
in the pic, you can see how you can download. is a little bit tricky
download zip
inside the zip, you can see different versions of
Nutso is only a font with Numbers etc.
stacked fraction must work in AI, ID and other software that works with open type features.
thank you in advance.
@Bhikkhu Pesala my question is. how I can transfer this features to other fonts to have the stacked fraction features?
Nutso: https://github.com/TiroTypeworks/Nutso
-
- Top Typographer
- Posts: 9890
- Joined: Tue Oct 29, 2002 5:28 am
- Location: Seven Kings, London UK
- Contact:
Re: Nutso font doesn’t work correctly
Copy/paste the glyphs, and copy/paste the relevant code (afrc feature, lookup tables, kerning pairs), from the code editor.
However, as noted the code does not work in AI, ID, etc.
-
- Moderator
- Posts: 11239
- Joined: Fri Oct 04, 2002 12:41 am
- Location: Bilthoven, The Netherlands
- Contact:
Re: Nutso font doesn’t work correctly
The Nutso font also requires the <mark> and <mkmk> features to be supported and active. It seems that is the issue with Adobe Illustrator. Not sure if you can enabled them to make it work.
The github project comes with samples for Adobe InDesign CS6, so I wonder if those still work in recent version of ID?
Re: Nutso font doesn’t work correctly
@Erwin i have only activaded this and the result is the same in Illustrator.
in InDesign i have seen in the demo file that fraction looks correct, however, when I write the fraction normal like 1 1/33 I see a hangover like the pictures above the first post.
@Bhikkhu yes when this would be work right.
I see the dam... stacked fraction is a big problem.
in InDesign i have seen in the demo file that fraction looks correct, however, when I write the fraction normal like 1 1/33 I see a hangover like the pictures above the first post.
@Bhikkhu yes when this would be work right.
I see the dam... stacked fraction is a big problem.
-
- Moderator
- Posts: 11239
- Joined: Fri Oct 04, 2002 12:41 am
- Location: Bilthoven, The Netherlands
- Contact:
Re: Nutso font doesn’t work correctly
As noted in the Nutso v1.02, 19 February 2014 release notes:deaneau wrote: ↑Sun Nov 25, 2018 3:07 pmin InDesign i have seen in the demo file that fraction looks correct, however, when I write the fraction normal like 1 1/33 I see a hangover like the pictures above the first post.
@Bhikkhu yes when this would be work right.
I see the dam... stacked fraction is a big problem.
"Some care needs to be taken when editing text employing nut fractions implemented as in Nutso: the fraction feature must only be applied to discreet runs of characters in the appropriate format, and tracking (letterspacing) functions must not be applied to the fractions."
Maybe Nutso2 better suits your needs.
-
- Moderator
- Posts: 11239
- Joined: Fri Oct 04, 2002 12:41 am
- Location: Bilthoven, The Netherlands
- Contact:
Re: Nutso font doesn’t work correctly
You might want to consider using Diagonal Fractions.
Re: Nutso font doesn’t work correctly
My AI CS6 doesn't implement marks. I suspect the newest version does as I don't think there is anything special needed to turn on the ME features (for which in older AI versions, the actual ME version is required...though I believe it can be scripted, ID can).
My ID CS6 works properly as long as one only highlights (as mentioned by Erwin) those characters that make up the fraction. One cannot just turn on Fractions or also select the whole number portions (if any).
This same thing applies in the Affinity products. Just select the numerals that make up the fraction itself. So whether in ID or Affinity applications, make a character style that has the Fraction feature enabled, perhaps assign a shortcut for it, then use it to apply the frac feature only to selected fractions.
My ID CS6 works properly as long as one only highlights (as mentioned by Erwin) those characters that make up the fraction. One cannot just turn on Fractions or also select the whole number portions (if any).
This same thing applies in the Affinity products. Just select the numerals that make up the fraction itself. So whether in ID or Affinity applications, make a character style that has the Fraction feature enabled, perhaps assign a shortcut for it, then use it to apply the frac feature only to selected fractions.
Last edited by Bhikkhu Pesala on Sun Nov 25, 2018 4:54 pm, edited 1 time in total.
Reason: corrected typo
Reason: corrected typo
Re: Nutso font doesn’t work correctly
OK. For versions of Illy that do not have the World Ready Composer (WRC), it can be turned on by opening a template that has been made using ME versions.
Here's a screen shot of the WRC turned on in my non-ME version of Illy CS6:
One such template I found is available at Thomas Phinny's web site. Scroll down to the Templates section.
http://www.thomasphinney.com/2009/01/ad ... -composer/
However, in new enough versions, you may be able to turn on the WRC without a template. If you are using a newer version of AI CC, poke around and find out if you can turn on the WRC for it.
Mike
Here's a screen shot of the WRC turned on in my non-ME version of Illy CS6:
One such template I found is available at Thomas Phinny's web site. Scroll down to the Templates section.
http://www.thomasphinney.com/2009/01/ad ... -composer/
However, in new enough versions, you may be able to turn on the WRC without a template. If you are using a newer version of AI CC, poke around and find out if you can turn on the WRC for it.
Mike
Re: Nutso font doesn’t work correctly
@Erwin i have try all versions in AI and ID
thank you for a guide to diagonal fraction stroke
actually is the horizontal fraction stroke more important
@Mike i work with CC2018
thank you for a guide to diagonal fraction stroke
actually is the horizontal fraction stroke more important
@Mike i work with CC2018
Re: Nutso font doesn’t work correctly
Is that paragraph using the WRT? Does it work in the templates I pointed to?
Re: Nutso font doesn’t work correctly
@Mike
I'm newcomer in font design and FontDesigner, what is WRT?
in CC2018 the templates work only in InDesign. however when I write in InDesign its not possible to have the same result.
I'm newcomer in font design and FontDesigner, what is WRT?
in CC2018 the templates work only in InDesign. however when I write in InDesign its not possible to have the same result.
Re: Nutso font doesn’t work correctly
World Ready Composer = WRC: I accidentally used a T at the end instead of C...
The AI template should have opened fine in AI.
It works fine in ID & AI CS6. If it doesn't in ID CC2018 then that points to either a problem that has crept in or one actually has to use an ME version (ME = Middle Eastern but the ME version incorporates more languages that use complex scripts, like Indic languages), which you can download freely.
Certain OpenType features are disabled (have always been disabled) in non-ME versions for whatever reason. Among those are certain features required to make the Nutso fonts work properly as these features regarding marks for placement purposes that Nutso uses are used widely in Middle Eastern and complex scripts (such as Indic languages).
I don't know what to say at this point.
Mike
The AI template should have opened fine in AI.
It works fine in ID & AI CS6. If it doesn't in ID CC2018 then that points to either a problem that has crept in or one actually has to use an ME version (ME = Middle Eastern but the ME version incorporates more languages that use complex scripts, like Indic languages), which you can download freely.
Certain OpenType features are disabled (have always been disabled) in non-ME versions for whatever reason. Among those are certain features required to make the Nutso fonts work properly as these features regarding marks for placement purposes that Nutso uses are used widely in Middle Eastern and complex scripts (such as Indic languages).
I don't know what to say at this point.
Mike
-
- Top Typographer
- Posts: 9890
- Joined: Tue Oct 29, 2002 5:28 am
- Location: Seven Kings, London UK
- Contact:
Re: Nutso font doesn’t work correctly
Font Designers and Coders are often obsessive. Sometimes they need to step back and reflect on whether something is worth doing, even if it can be done. In this case, I suspect that it cannot because not all applications support the same set of features.
Have you evaluated the need for this feature? Is it just for your own use, or are you hoping to sell the font? Or is it just the challenge of solving a puzzle that makes you expend so much effort on this task?
Have you evaluated the need for this feature? Is it just for your own use, or are you hoping to sell the font? Or is it just the challenge of solving a puzzle that makes you expend so much effort on this task?