[CLOSED] Characters with holes will be filled when I import to Fontcreator
-
- Posts: 59
- Joined: Mon Nov 06, 2023 8:06 am
[CLOSED] Characters with holes will be filled when I import to Fontcreator
I make two rectangles in Affinity Designer. One is bigger and the other is smaller. I make center the smaller one on the bigger one. I make the smaller one on the top layer. I subtracted the smaller one from the bigger and there will an unfilled hole on the center of the bigger. Most time when I copy this object to the Fontcreator the unfilled area will be filled in Fontcreator.
Last edited by Bhikkhu Pesala on Sat Nov 18, 2023 6:32 pm, edited 1 time in total.
Win 11 23H2 Fontcreator 15.0.0.2955
-
- Top Typographer
- Posts: 9888
- Joined: Tue Oct 29, 2002 5:28 am
- Location: Seven Kings, London UK
- Contact:
Re: Characters with holes will be filled when I import to Fontcreator
Try reversing the contour direction on the inner contour, or use the Validation tool.
-
- Posts: 59
- Joined: Mon Nov 06, 2023 8:06 am
Re: Characters with holes will be filled when I import to Fontcreator
Validation works. Thanks!
Win 11 23H2 Fontcreator 15.0.0.2955