# grayscaling **URL:** \ **Category:** FontCreator - Support\ **Created:** [April 28, 2006, 3:24pm UTC](https://forum.high-logic.com/t/grayscaling/1301 "2006-04-28T15:24:31Z")\ **Posts on this page:** 1\ **Showing post:** 1
**Author:** ![peterv](https://forum.high-logic.com/letter_avatar_proxy/v4/letter/p/a8b319/32.png) [@peterv](https://forum.high-logic.com/u/peterv)\ **Post date:** [April 28, 2006, 3:24pm UTC](https://forum.high-logic.com/t/grayscaling/1301/1 "2006-04-28T15:24:31Z")
On the FAQ page, you write : “Another solution [for bad quality at small font sizes] is grayscale support. To enable it select Grayscale from the Format menu. Delete all entries. Now add a new entry and set “Grayscale rendering”.” I tried entering some new gasps, but without any success ; nothing has changed. The font I made is based upon Times New Roman, so I tried entering the same limits as in the original font, but even that doesn’t have any effect. Can you give me any advice on what limits to use, or how I could solve the problem? Thanks, Peter --- _[View the full topic](https://forum.high-logic.com/t/grayscaling/1301)._