Synchronising Four Typestyles

Before asking a question on FontCreator look here for possible solutions and tutorials. Please do not post support requests here.
Post Reply
Bhikkhu Pesala
Top Typographer
Top Typographer
Posts: 8345
Joined: Tue Oct 29, 2002 5:28 am
Location: Seven Kings, London UK
Contact:

Synchronising Four Typestyles

Post by Bhikkhu Pesala » Mon Jun 05, 2006 11:36 am

A task I frequently need to do is to check for inconsistencies between the four different type-styles of a font: regular, italic, bold, and bold italic. Some fonts may have an even larger family of styles.

I used to check for errors by installing the fonts, opening a document in Serif Page Plus with a full range of characters, then I would select all and toggle italic and bold on/off to compare the type-styles. Any obvious errors would jump out, but still many were hard to spot.

With the improvements in Font Creator 5.5 making the Preview Toolbar easier to use with text wrap and a shortcut key to toggle it on and off, I found a better method.

Setting up the Overview
  • Open all four type-styles of the font in this order: italic, regular, bold, bold italic.
  • From Tools, Options, Overview, turn on the caption, and set the Glyph width to 46 pixels and the Glyph height to 61 pixels. (This is for a 1024 x 768 monitor)
  • Turn Off the Status bar (F4)
  • Arrange one row of toolbars at the top, and one at the side.
  • Tile the Windows. You should find that you have ten columns by four rows of glyphs in each tiled window. The number is not important for this tutorial — you can set it up differently if you have a bigger monitor or sharper eyesight.
  • Set a bookmark by pressing Control Shift 0 in the Regular type-style where you want to start checking for errors. For this tutorial, I started at glyph 8304, Superscript Zero.
  • Use Control F6 or Control Tab to switch to the next type-style
  • Press Control 0 to go to the bookmark
  • Repeat Control Tab, Control 0 twice more to synchronise all four type-styles
  • Select the range of glyphs you want to examine for errors and press "P" to add them to the Preview Toolbar, and to display the toolbar.
You should now have a screen something like this one below, where I have selected the full range of superscript glyphs for checking.

Image

Adjust the Preview Toolbar to display the glyphs in one row at a decent size, and use Control F6 or Control Tab to toggle between the four Type-styles. Now it is very easy to spot the slightest inconsistencies. There are still some glaring errors in my superscripts.

Image

Image

Image

Image

The spacing is not regular, and the superscript minus, plus, and equals are out of vertical alignment.

You can compare glyphs very quickly in this way, and since you are working in FontCreator you can correct the errors at once. Either you could compare the glyphs row by row as you work through the font, or in logical groups of glyphs.

When comparing combining diacritical marks, or other glyphs with zero advance width, you will need to edit the text string in the Preview Toolbar to add spacing before the Unicode escape character "\" in order to see the glyphs separately, or you could type text characters to see the combining accents combined with suitable base glyphs.

Image

It is probably best to turn off Kerning on the Preview Toolbar for this tutorial.
My FontsReviews: MainTypeFont CreatorHelpFC12 Pro + MT9.0 @ Win10 1903 build 18362.356

Bhikkhu Pesala
Top Typographer
Top Typographer
Posts: 8345
Joined: Tue Oct 29, 2002 5:28 am
Location: Seven Kings, London UK
Contact:

Post by Bhikkhu Pesala » Wed Jul 05, 2006 8:04 am

I find it useful to use a Windows macro recorder (Perfect Keyboard Pro is the one that I have) to automate some repetitive tasks. As you probably know by now, there are a lot of repetitive tasks involved in font editing.

For this tutorial, I compared the regular and bold typestyles of the same font to look for any inconsistencies. It often happens that I redesign one glyph, or several glyphs in one typestyle, then get distracted before I get around to modifying the other typestyles to match.

Setting up the Font Creator Workspace

Image
  • Open the two fonts
  • Open a Glyph Edit Window in each at the same glyph
  • Minimize the overview window of each font
  • Tile the Glyph edit Windows vertically
  • Arrange the toolbars that you need.
Recording the Macro

Start the recording process to record the keystrokes.

<alt>w<alt>3 ; Pull down the Window menu and select the third window
<alt><right><alt> ; Scroll to the next glyph
<alt>w<alt>4 ; Pull down the Window menu and select the fourth window
<alt><right><alt> ; Scroll to the next glyph

Assign the macro to a suitable shortcut. I found that keys on the numeric keypad are very convenient as they are not used by FontCreator. Try something like this:

Numpad 4 = Previous Glyph
Numpad 5 = Select all and align centre
Numpad 6 = Next Glyph

Although Alt Left/Right can already be used, when you have to press Alt Left/Right a few hundred times using both hands, you will see how much easier it is to press a single key with the fingers of the right hand.

Now you are ready to scroll through the font, comparing glyphs for inconsistencies. In the illustration you may have noticed that the bold fraction 1/2 is too tightly spaced. I had adjusted the fractions in the regular typestyle, but forgot to fix the bold ones to match.

Spot the Difference

Image

Some errors are easier to spot than others. :o
My FontsReviews: MainTypeFont CreatorHelpFC12 Pro + MT9.0 @ Win10 1903 build 18362.356

Post Reply