Producing a colourized glyph using FontCreator 7.5.0
Posted: Tue Aug 06, 2013 2:50 pm
The purpose of this tutorial is to show how to produce a colourized glyph using FontCreator 7.5.0 (build 512).
The tutorial is written especially for the purpose.
The tutorial explains how to produce a colourized glyph for a lowercase letter i.
Please know that I am not in any way suggesting that colourizing a lowercase i is a good typical use for colour glyphs. Maybe it is, maybe it is not. That is not the issue in this tutorial.
The reason for colourizing a lowercase i in this tutorial is that I was looking for an example, yet I found that the tasks for which I have thus far used the colourizing technique also use other techniques, such as additional artwork or Private Use Area mappings and I wished to keep the tutorial just about straightforwardly colourizing one glyph.
So, here is a transcript of working through producing a colourized glyph for a lowercase letter i.
The transcript is as I worked through the process.
Please note that I have written what I did. Sometimes the choice made, such as the colour of the metrics lines, was just my choice at the time. I thought that it might be helpful to list everything in case that is helpful to some readers.
William Overington
6 August 2013
----
Start FontCreator 7.5
I am using FontCreator 7.5.0 (build 512) on a computer that is running the Windows xp operating system.
File
New Project...
Use the following name in the dialogue box.
tutorial_example
Choose Regular
Choose Don't include outlines
Click OK
File
Save Project
tutorial_example.fcp
tutorial_example.fcp was offered automatically, so I used that.
Save
Tools
Grid Options...
Show Grid checked
Between grid points in units set to 256
Between grid points in pixels 16
Solid
Color as Light Orange
OK
Tools
Metrics Options...
Show metrics and reference line checked
Line Style Solid
Color Blue
Except for Typo Ascender and Typo Descender, everything is checked.
OK
File
Save Project
In the rightmost drop down selection box of the standard toolbar, choose Glyph Name.
In the Font Overview window, highlight the cell for lowercase i.
Press the Return key
This should open the glyph edit window.
Draw a lowercase letter i.
The design is not critical as long as there are two clockwise contours that do not overlap and are both within the box that is formed by the metrics lines and one contour can be referred to as the vertical and the other contour can be referred to as the dot.
Close the glyph edit window.
File
Save Project
Display the Preview panel either by pressing the F8 key or by the following.
View
Toolbars
Click on the word Preview in the cascading menu that is displayed.
In the preview panel that is displayed, key the lowercase letter i into the text box at the top right.
Set the leftmost box to 144 and note that the Kerning checkbox is checked.
Thus far everything is monochrome.
The task is now to make a colourized glyph of the lowercase i with a green vertical and a red dot.
The choice of colours of green and red is more or less arbitrary, but there are two reasons for naming them.
The first reason is that it is easier to explain the process by using specific colours rather than writing something like "the colour that you have chosen for the vertical".
The second reason is that I have avoided using blue. That is because FontCreator uses blue as a placeholder colour and, although one can colour a contour blue, I feel that it is easier if I avoid using blue in this example so that mention of blue in this example is for when FontCreator is using blue as a placeholder.
In the Font Overview window, highlight the cell for lowercase i. It might still be highlighted from before, yet I think that it worth mentioning the action here.
On the Drawing toolbar, make sure that the Fill Outlines facility is on. It is the logo that has a black filled square and an unfilled square and a diagonal line.
On the main FontCreator menu bar,
Insert
Glyphs...
Insert 2 Glyphs
After each selected glyph
OK
In the Font Overview window, highlight only the cell for lowercase i.
Edit
Copy
Highlight only the cell that is next to the right of lowercase i cell.
Edit
Paste
Highlight only the cell that is next but one to the right of the lowercase i cell.
Edit
Paste
File
Save Project
----
Highlight only the cell that is next to the right of lowercase i cell.
Press the Return key on the keyboard.
In the Glyph Edit window, delete the dot contour.
Somewhere on the orange grid, right click.
Click on Colorize
The vertical contour should become blue.
View
Toolbars
Palette
Click on the green square.
Click on the vertical contour.
The vertical contour should turn green.
Close the palette window.
Close the glyph edit window.
----
Highlight only the cell that is next but one to the right of lowercase i cell.
Press the Return key on the keyboard.
In the Glyph Edit window, delete the vertical contour.
Somewhere on the orange grid, right click.
Click on Colorize
The dot contour should become blue.
View
Toolbars
Palette
Click on the red square.
Click on the dot contour.
The dot contour should turn red.
Close the palette window.
Close the glyph edit window.
----
Highlight only the lowercase i cell.
Press the Return key on the keyboard.
Somewhere on the orange grid, right click.
Click on Colorize
The two contours should both become blue.
Click on the dot.
Press the Delete key on the keyboard.
Somewhere on the orange grid, right click.
Click on Add...
In the dialogue panel, highlight the cell with just the vertical contour in it.
Click OK
Somewhere on the orange grid, right click.
Click on Add...
In the dialogue panel, highlight the cell with just the dot contour in it.
Click OK
Close the glyph edit window.
----
File
Save Project
Click on the background to the right of the cells so as to remove the highlighting from the cell.
View
Toolbars
Preview
The panel should display a large lowercase i with a green vertical and a red dot.
The tutorial is written especially for the purpose.
The tutorial explains how to produce a colourized glyph for a lowercase letter i.
Please know that I am not in any way suggesting that colourizing a lowercase i is a good typical use for colour glyphs. Maybe it is, maybe it is not. That is not the issue in this tutorial.
The reason for colourizing a lowercase i in this tutorial is that I was looking for an example, yet I found that the tasks for which I have thus far used the colourizing technique also use other techniques, such as additional artwork or Private Use Area mappings and I wished to keep the tutorial just about straightforwardly colourizing one glyph.
So, here is a transcript of working through producing a colourized glyph for a lowercase letter i.
The transcript is as I worked through the process.
Please note that I have written what I did. Sometimes the choice made, such as the colour of the metrics lines, was just my choice at the time. I thought that it might be helpful to list everything in case that is helpful to some readers.
William Overington
6 August 2013
----
Start FontCreator 7.5
I am using FontCreator 7.5.0 (build 512) on a computer that is running the Windows xp operating system.
File
New Project...
Use the following name in the dialogue box.
tutorial_example
Choose Regular
Choose Don't include outlines
Click OK
File
Save Project
tutorial_example.fcp
tutorial_example.fcp was offered automatically, so I used that.
Save
Tools
Grid Options...
Show Grid checked
Between grid points in units set to 256
Between grid points in pixels 16
Solid
Color as Light Orange
OK
Tools
Metrics Options...
Show metrics and reference line checked
Line Style Solid
Color Blue
Except for Typo Ascender and Typo Descender, everything is checked.
OK
File
Save Project
In the rightmost drop down selection box of the standard toolbar, choose Glyph Name.
In the Font Overview window, highlight the cell for lowercase i.
Press the Return key
This should open the glyph edit window.
Draw a lowercase letter i.
The design is not critical as long as there are two clockwise contours that do not overlap and are both within the box that is formed by the metrics lines and one contour can be referred to as the vertical and the other contour can be referred to as the dot.
Close the glyph edit window.
File
Save Project
Display the Preview panel either by pressing the F8 key or by the following.
View
Toolbars
Click on the word Preview in the cascading menu that is displayed.
In the preview panel that is displayed, key the lowercase letter i into the text box at the top right.
Set the leftmost box to 144 and note that the Kerning checkbox is checked.
Thus far everything is monochrome.
The task is now to make a colourized glyph of the lowercase i with a green vertical and a red dot.
The choice of colours of green and red is more or less arbitrary, but there are two reasons for naming them.
The first reason is that it is easier to explain the process by using specific colours rather than writing something like "the colour that you have chosen for the vertical".
The second reason is that I have avoided using blue. That is because FontCreator uses blue as a placeholder colour and, although one can colour a contour blue, I feel that it is easier if I avoid using blue in this example so that mention of blue in this example is for when FontCreator is using blue as a placeholder.
In the Font Overview window, highlight the cell for lowercase i. It might still be highlighted from before, yet I think that it worth mentioning the action here.
On the Drawing toolbar, make sure that the Fill Outlines facility is on. It is the logo that has a black filled square and an unfilled square and a diagonal line.
On the main FontCreator menu bar,
Insert
Glyphs...
Insert 2 Glyphs
After each selected glyph
OK
In the Font Overview window, highlight only the cell for lowercase i.
Edit
Copy
Highlight only the cell that is next to the right of lowercase i cell.
Edit
Paste
Highlight only the cell that is next but one to the right of the lowercase i cell.
Edit
Paste
File
Save Project
----
Highlight only the cell that is next to the right of lowercase i cell.
Press the Return key on the keyboard.
In the Glyph Edit window, delete the dot contour.
Somewhere on the orange grid, right click.
Click on Colorize
The vertical contour should become blue.
View
Toolbars
Palette
Click on the green square.
Click on the vertical contour.
The vertical contour should turn green.
Close the palette window.
Close the glyph edit window.
----
Highlight only the cell that is next but one to the right of lowercase i cell.
Press the Return key on the keyboard.
In the Glyph Edit window, delete the vertical contour.
Somewhere on the orange grid, right click.
Click on Colorize
The dot contour should become blue.
View
Toolbars
Palette
Click on the red square.
Click on the dot contour.
The dot contour should turn red.
Close the palette window.
Close the glyph edit window.
----
Highlight only the lowercase i cell.
Press the Return key on the keyboard.
Somewhere on the orange grid, right click.
Click on Colorize
The two contours should both become blue.
Click on the dot.
Press the Delete key on the keyboard.
Somewhere on the orange grid, right click.
Click on Add...
In the dialogue panel, highlight the cell with just the vertical contour in it.
Click OK
Somewhere on the orange grid, right click.
Click on Add...
In the dialogue panel, highlight the cell with just the dot contour in it.
Click OK
Close the glyph edit window.
----
File
Save Project
Click on the background to the right of the cells so as to remove the highlighting from the cell.
View
Toolbars
Preview
The panel should display a large lowercase i with a green vertical and a red dot.